The EN Eurocodes
The EN Eurocodes are a series of 10 European Standards, EN 1990 - EN 1999, providing a common approach for the design of buildings and other civil engineering works and construction products. They are the recommended means of giving a presumption of conformity with the basic requirements of the Construction Products Regulation for construction works and products that bear the CE Marking, as well as the preferred reference for technical specifications in public contracts. [more …]
Tender process launched to draft the next generation of Structural Eurocodes
Deadline - May 25, 2015
A six year programme of work, supported by the European Commission, has been launched to develop the next generation of European standards for structural and geotechnical design. The new Standards are expected to be published in 2020 and will embrace new technologies and market needs, extending the scope of the existing Structural Eurocodes suite (EN 1990 – EN 1999). [more …]
JRC Scientific and Policy Report: Eurocodes: Structural Fire Design - Worked Examples
This document is a report with worked examples presenting the fire resistance assessment of structures according to the Eurocodes. The authors were involved in the preparation and/or assessment of the Eurocodes structural fire design parts. Each chapter of the report focuses on a specific structural material (i.e. steel, concrete, masonry, etc.) and addresses the principles and design methods followed by worked example(s). The provided information illustrates the basic design methods through examples of application. It will allow any designer to get a good understanding about the fundamentals of the fire parts of the Eurocodes and to carry out fire resistance assessments of various structures.
Booklet by European Commission: The European construction sector – A global partner
The Joint Research Centre, the Enterprise and Industry Directorate General and the Energy Directorate General produced a brochure on the integrated approach of European policies for the construction sector. It covers sustainability, in terms of energy and resource efficiency, health and safety issues for buildings, construction works and products. The brochure gives information on the available support schemes and financial instruments and highlights the benefits of international cooperation.
JRC Scientific and Policy Report: Eurocode 2: Design of Concrete Buildings - Worked Examples
This document is a report with worked examples presenting step-by-step the design of a reinforced concrete cast on site building following Eurocode 2. The design process has been divided between different authors, some of whom were involved in the preparation and/or assessment of Eurocode 2. Each chapter of the report focuses on a different step in the design process: conceptual design, structural analyses, limit states design and verification, detailing of the reinforcement as well as some geotechnical aspects of building design. Last chapter gives general overview of the fire design according to the Eurocodes.
JRC Report: Eurocode 7: Geotechnical Design - Worked examples
This document is a report with worked examples summarizing the general rules, basic design principles and design methods for geotechnical design following Eurocodes. It comprises an overview of Eurocode 7 with focus on the design requirements, actions and design situations, and limit states. Different aspects to be considered for designing shallow foundations, gravity walls, embedded walls and deep foundations are covered in the report. The provisions of Eurocode 7 for ground investigations and testing for geotechnical design, overall stability of and movements in the ground, slopes, hydraulic failure modes and verifications against them are also presented. The Annex contains worked examples to accompany the various chapters of this report.
JRC Report: Eurocode 8: Seismic Design of Buildings - Worked examples
This JRC Report document presents in detail the seismic design of a reinforced concrete and steel building following the Eurocodes. It summarizes important points of the Eurocode 8 for the seismic design of concrete and steel buildings including foundations, utilizing a common generic building as a basis. The building worked example was presented at the workshop "Eurocode 8: Seismic Design of Buildings", held on 10-11 February 2011 in Lisbon, Portugal. The workshop was organized by JRC with the support of DG ENTR and in collaboration with CEN/TC250/Sub-Committee 8 and the National Laboratory for Civil Engineering (LNEC, Lisbon).Download the whole report (8.1MB)
Download the main part of the report only (7.3MB)
Download the annexes of the report only (0.6MB)
JRC Report: Bridge Design to Eurocodes - Worked examples
This JRC reports presents in detail the design of a bridge structure following the Eurocodes. It summarizes important points of the Eurocodes for the design of concrete, steel and composite road bridges, including foundations and seismic design, utilizing a common bridge structure as a basis. The bridge design worked example was presented at the workshop "Bridge Design to the Eurocodes", held on 4-6 October 2010 in Vienna, Austria. The workshop was organized by JRC with the support of DG ENTR and in collaboration with CEN/TC250/Horizontal Group Bridges, the Austrian Federal Ministry for Transport, Innovation and Technology and the Austrian Standards Institute.Download the whole report (25.9MB)
Download the main part of the report only (16.2MB)
Download the appendices of the report only (10.2MB)
Eurocode SoftwareProf. Francesco Biasioli form the Politecnico di Torino compiled a list of commercial and freely available Eurocode software.
Message from CEN/TC250 chairmanJ-A Calgaro, former chairman of CEN/TC250, outlines the medium-term strategy to uphold the Eurocodes as the most advanced codes for the design of civil engineering works.
Te Wero Bridge, New ZealandThe project for a two-leaf aluminium bridge designed with Eurocode 9 won the international competition for the Te Wero Bridge that will be constructed in Auckland, New Zealand.
JRC support to implementation and useDownload the JRC reports on the activities in support to the implementation, harmonisation and further development of the Eurocodes.
Last Uploaded Publication